Dave's Manure Pumping Process Reference



How to do a Cross Over


(CAUTION: If out-Pressure above 110 on Main Pump, Raise Boosters RPM Immediatly
Critical***(Above 140 out-Pressure)***
 If in-Pressure above 5 on Boosters, Raise RPM on Booster by 100RPM immediately
Critical:***(Above 20 in-Pressure on Boosters***
  1. Main, and all applicable Boosters stay the same
  2. Tractor speed must be increased to reduce burn on fields
  3. Follow your hose to the intersection
  4. Then drive straight(80% distance to opposite corner of square(If hose has slack go further, if hose was short on square start, slightly reduce distance to corner))
  5. Turn back on square starting point side
  6. Follow hose to intersection
  7. Drive 50% distance to start of crossover corner
  8. Turn back on square starting point side
  9. Follow hose to intersection
  10. Drive 30% distance to far corner
  11. Turn back on square starting point side
  12. Drive to intersection following hose
  13. Drive to square starting point corner
  14. Turn to unfinished side of square
  15. Reduce speed
  16. Mark A point(if autopilot line needs to be reset)
  17. Proceed to opposite side of triangle
  18. Mark B point(If autopilot line was reset)
  19. Cross over complete